Did You Know That You Can Light Up The iPhone Apple Logo Just Like A MacBook?

This is something new!

Did You Know That You Can Light Up The iPhone Apple Logo Just Like A MacBook?
SPONSORED

You may not be Steve Jobs but you want to be one, right? One of the major changes brought by the Apple man to this world was the innovation of iPhone. You wouldn't be connected to the internet through your phone right now if it wouldn't be for what he created years back. What he did not do is put a glowing light at the back of an iPhone too just like he did with the MacBook. And, since then people have been trying to convert their iPhones into MacBook, not physically but just making attempts for the Apple logo on iPhone's back to glow just like that of a MacBook. 

While people are after predicting what the next model will be like, why don't you learn to make some changes to the current model. Here's something for the iPhone 6 and 6 Plus holders which can help you make your iPhone more unique even among the bunch of iPhone possessors. 

You can make your iPhone apple light up like it does on a MacBook.

Light Up The iPhone Apple Logo

Now, what you need to be ready with is a toolkit (mentioned below) because you wouldn't want any of the minute parts inside the handset to fall elsewhere or get damaged. Otherwise, if you lose any of it, then you will need a lot more than just the following guide to get your iPhone working again.

RELATED STORIES

1. First, you will need the light kit.

Light Up The iPhone Apple Logo
via

It comprises of an LED strip, tape, insulation and a tool kit.

2. To start with, turn off your phone.

Light Up The iPhone Apple Logo
via

3. Remove the two screws from the bottom of the phone.

Light Up The iPhone Apple Logo
via

4. Stick the suction cup with the screen, available in the kit.

4. Stick the suction cup with the screen, available in the kit.
via

This will help you to pull off the screen easily and put the pry tool underneath and separate it from the base.

5. Take out the silver metal plate and the connectors to separate the screen.

Light Up The iPhone Apple Logo
via

6. Take out the connectors from this area to remove the battery.

Light Up The iPhone Apple Logo
via

You can use a butter knife to do this but be careful, so that you don't ruin any of the parts.

7. Scrape off the tape that is stuck on the screen.

Light Up The iPhone Apple Logo
via

After removing the tape, you will be able to see the three metal connectors and the screen should look the same as shown in the image.

8. With the help of the screwdriver, peel off the silver layer as shown.

Light Up The iPhone Apple Logo
via

Keep it safely aside as you might need this portion, in case you want to undo the same.

9. Take the LED and put it on the Apple logo.

 9. Take the LED and put it on the Apple logo.
via

Then, put back the battery and all the connectors which you had put earlier.

10. Put the foam as shown in the picture and stick it with the tape.

Light Up The iPhone Apple Logo
via

You can now put the screen back and put the bottom screws back again.

When you are complete, switch the phone on and you will find the back of your phone lighting up.

Here, you can have a look at how they did it.

This article is based on the video above. WittyFeed doesn't own its authenticity.

If you like reading this, you may also like: Ever Wondered What These White Lines on iPhones mean?

Have you ever tried this trick?